Digitale Bibliotheek
Sluiten Bladeren door artikelen uit een tijdschrift
 
<< vorige    volgende >>
     Tijdschrift beschrijving
       Alle jaargangen van het bijbehorende tijdschrift
         Alle afleveringen van het bijbehorende jaargang
           Alle artikelen van de bijbehorende aflevering
                                       Details van artikel 4 van 5 gevonden artikelen
 
 
  STUDY OF FLOW BOILING HEAT TRANSFER IN A TUBE WITH AXIAL MICROGROOVES
 
 
Titel: STUDY OF FLOW BOILING HEAT TRANSFER IN A TUBE WITH AXIAL MICROGROOVES
Auteur: Cheng, Lixin
Chen, Tingkuan
Verschenen in: Experimental heat transfer
Paginering: Jaargang 14 (2001) nr. 1 pagina's 59-73
Jaar: 2001-01-01
Inhoud: Experiments of upward flow boiling heat transfer with water in a vertical smooth tube and a tube with axial microgrooves were conducted. Both of the tested tubes have a length of 2.5 m, an inner diameter of 15 mm, and an outlet diameter of 19 mm. The tube with axial microgrooves has many micro rectangle grooves in its inner wall along the axial direction. The grooves have a depth of 0.5 mm and a width of 0.3 mm. The tests were performed at an absolute pressure of 6 bar. The heat flux ranged from 0 to 550 kW/m2 and the mass flux was selected at 410, 610, and 810 kg/m2 s. By comparison, flow boiling heat transfer coefficients in the enhanced tube are 1.6 to 2.7-fold that in the smooth tube, while the frictional pressure drop in the enhanced tube is slightly greater than that in the smooth tube. The augmentation of flow boiling heat transfer in the tube with axial microgrooves is apparent. Based on the experimental data, a correlation of flow boiling heat transfer is proposed for the enhanced tube. Finally, the mechanisms of heat transfer enhancement are analyzed.
Uitgever: Taylor & Francis
Bronbestand: Elektronische Wetenschappelijke Tijdschriften
 
 

                             Details van artikel 4 van 5 gevonden artikelen
 
<< vorige    volgende >>
 
 Koninklijke Bibliotheek - Nationale Bibliotheek van Nederland