TREATMENT OF KRAFT PULP AND PAPER WASTEWATERS BY MEANS OF FOAM SEPARATION
Titel:
TREATMENT OF KRAFT PULP AND PAPER WASTEWATERS BY MEANS OF FOAM SEPARATION
Auteur:
Boardman, Gregory D. Seyffert, Hans J. Knocke, William R.
Verschenen in:
Chemical engineering communications
Paginering:
Jaargang 114 (1992) nr. 1 pagina's 89-102
Jaar:
1992-04-01
Inhoud:
The pulp and paper industry is the third largest industrial consumer of fresh water in the United States. The current use rate of over two trillion gallons annually is expected to increase as the demand for paper products continues to rise Of the various methods of producing paper from wood, the Kraft process is the most widely used. Color, dissolved and suspended organic matter, and dissolved inorganic solids are major pollutants in Kraft processing wastewater. Current federal regulations limit the amount of solids and organic matter that a Kraft facility may dispose into public waters, so most plants have some form of wastewater treatment In this study, the capacity of a continuous-flow, foam separation system to effect removals of color from a Kraft process wastewater was evaluated. The cationic surfactant, EHDABr, was used to precipitate color bodies in the wastewater and create a foam to carry the precipitates from the wastewater. The effect of pH adjustment was also considered. Color removals in the area of 90% were achieved Removal of precipitated solids was enhanced by increasing the detention of wastewater in the treatment system.