Several types of ink are used in web offset printing. However, heatset inks predominate in general commercial work. In these inks, the vehicle consists of resin dissolved in a solvent, and drying takes place mainly by evaporation. In heatset web offset printing, the printed web is passed through dryers, which raise the temperature of the web enough to cause evaporation of the solvent. leaving only the resin to bind the pigment into a film and to the paper. Since the solvents used in the heatset inks vary in boiling range from approximately 232° C to 316° C, and the solvent selected depends on the printing conditions, it is necessary to determine the vapor pressure values of heatset inks versus web temperatures for drying calculations. The isoteniscope method is limited to only the vapor pressure measurement of liquids. It cannot be used for materials such as heatset inks. To overcome this difficulty, an apparatus was designed and con- structed by TEC Systems for directly measuring the vapor pressure versus temperature of heatset inks from approximately 21°C to 316°C. In this paper, TEC's apparatus, test procedure developed, and typical test results for pure solvents and heatset inks will be described.
Journal description